FAQ
BANNWAY has 7 presses of different capacities ranging from 750 tons to 4000 tons and of these presses, 2 are of 2200 tons; one each of 750 tons, 1500 tons, 4000 tons and 2 each of 1650 tons. Installed production capacity is 82,000 MT per annum. JAL has a most modern tool shop capable of producing high quality and intricate dies backed up by an international quality foundry.
BANNWAY products are exported to various countries and its export performance has been registering a healthy growth. The company has been awarded many times by Engineering Export Promotion Council and other governmental agencies for its excellent export performance.
We offer aluminium extrusions in alloys 6063, 6061, 6351, 6005, 6060, 6082. We are also offering special alloys like 2014, 2024, 6262 etc.
Though several alloys and tempers might be suitable for your application, it is structural or fabrication requirement that forms the basis of choice. BANNWAY would help you in choosing the best suited and the most economical alloy for your specific needs.
The aluminium extrusions are recyclable and have a substantial scrap value. Hence, it is economical as well as environment friendly. Recycling aluminium consumes only five percent energy required in producing new aluminium.
The packing method used will be HDPE packing where one individual bundle can hold approximately 100 kg of extrusions. In case of packing in wooden boxes, each pack can hold approx. 250 kg depending on customer’s choice. Another option available for packing is polythene. Stretch wrapping in automatic machines is also provided. For exports on full container load basis, the profiles are wrapped in polythene and stuffed directly into the containers. For cargo lesser than the truck / container load, the bundles will first be packed in polythene and then put into the wooden cases. Actual charges for packing would vary for different cases and the same can be provided on request.
For the existing and the new profiles, the minimum order quantity per profile will be 500 kg / 1000 kg.
Every care will be taken to supply according to customer’s requirements. There will, however, be a quantity tolerance of minimum +/-10%.
Security for new die cost should be borne by the indenter against guarantees of minimum off-takes within a specified period of time, failing which the security for new die will be forfeited. There also are minimum quantity restrictions in respect of initial off-take and subsequent off-takes. Die exclusivity also can be applied under the applicable conditions. Specific details can be provided on request.
Being an IS/ISO 9001:2000 certified company, materials are put into 100% inspection before dispatch, and subsequently, possibility of rejection at the customer’s end is rare. Complaints arising thereafter are attended to at the customer’s premises jointly by the BANNWAY marketing/technical staff and the problems are sorted out to the satisfaction of the customer. Appropriate corrective and preventive actions are put in place to prevent recurrence.
The most popular alloy used worldwide for Extrusion in Architecture is AA 6063 equivalent to or British HE9 or Canadian 50S.
Yes. Material of any length between 1 to 8 meters can be supplied. However, for maximum stuffing convenience, lengths of 5850mm and 5950mm for 20’ and 40’ containers respectively are suggested.
Yes, we can arrange for both anodizing and powder coating materials
BANNWAY’s dies are developed for different applications. The general catalogue is available on this website. Prices are specific for quantity and alloy and can be quoted on request.
For any new die, if an order is cancelled, then the SND (Security for New Die) would be forfeited and the customer would be debited for trial charges. Any commercial amendment and also for change in length / quantity would be accepted, if material is not extruded.
However if there is any technical / tolerance / dimensional change, SND and trial charges would be forfeited.
